找回密码
 注册会员

QQ登录

只需一步,快速开始

搜索
查看: 9363|回复: 6

关于ADAMS仿真---[图,求助]

[复制链接]
发表于 2007-5-18 13:26:36 | 显示全部楼层 |阅读模式

我用ADAMS做游梁式抽油机的仿真模型时,对驴头处的钢丝绳用连杆代替,并定义其与驴头的接触碰撞,但是仿真进行不下去了为什么啊?

# E% j9 a% H2 i e5 P7 `) ?9 U8 K

 

; H% Q0 w* N9 k# j, M3 N: j5 c

报错及警告:

* n2 b1 ~0 O7 u& W- n. Z% e6 i

WARNING:    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   NOTE:  The set of redundant constraints has changed at time = 0.0.
   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
ERROR:   Abnormal termination encountered in ADAMS/Solver.
ERROR:      The simulation stopped at time = 0.0.
 
   The equations of motion can not be solved at this point because of a
   singularity in the Jacobian matrix.  This singularity is due to the
   equation for PART pumping_unit.PART_39 ( PART/39 Xdot ).
ERROR:      The matrix is numerically singular.
WARNING:    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   NOTE:  The set of redundant constraints has changed at time = 0.0.
   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
ERROR:   Abnormal termination encountered in ADAMS/Solver.
ERROR:      The simulation stopped at time = 0.0.
 
   The equations of motion can not be solved at this point because of a
   singularity in the Jacobian matrix.  This singularity is due to the
   equation for PART pumping_unit.PART_39 ( PART/39 Xdot ).
ERROR:      The matrix is numerically singular.
WARNING:    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   NOTE:  The set of redundant constraints has changed at time = 0.0.
   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
ERROR:   Abnormal termination encountered in ADAMS/Solver.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 3.85955E-03.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 3.87531E-03.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 3.87531E-03.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 2.9254.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 2.9255.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 2.9255.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 2.9255.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.4308.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.4308.
WARNING:    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   NOTE:  The set of redundant constraints has changed at time = 4.4307.
   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.4308.
WARNING:    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   NOTE:  The set of redundant constraints has changed at time = 4.4307.
   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.5731.
WARNING:    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   NOTE:  The set of redundant constraints has changed at time = 4.5731.
   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.5731.
WARNING:    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   NOTE:  The set of redundant constraints has changed at time = 4.5731.
   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.5731.
WARNING:    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   NOTE:  The set of redundant constraints has changed at time = 4.5731.
   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.6156.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.6156.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.6156.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.6251.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.6251.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.6251.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.8588.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.8588.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.8588.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.8724.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.8724.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 4.8724.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 5.0307.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 5.0307.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 5.0307.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 5.5871.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 6.1315.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 7.8049.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 7.8049.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 7.8049.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 7.8053.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 7.8053.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 7.8053.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 2.9254.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 2.9255.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 2.9255.
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
   at time = 2.9255.

驴头处钢丝绳.BMP
虚拟机全貌.BMP
驴头处钢丝绳定义.BMP
回复

使用道具 举报

发表于 2009-5-30 15:29:51 | 显示全部楼层
楼主解决了没呀,我也出现这问题了,高手帮帮忙
发表于 2010-5-13 09:19:05 | 显示全部楼层
我也想了解一下这个问题是怎么解决的呀!
/ d: G6 _7 R* A" o; C1 V/ y8 J2 c我的是仿真过程中对一个物体施加接触实现的还比较可以,可是再添加另一个物体在仿真就出现这个问题了,
发表于 2010-5-13 09:26:06 | 显示全部楼层
我的错误代码是! m* [! G. ~- P
WARNING:    The symbolic refactorization failed.  The matrix is structurally singular
, ]- t6 k; G4 t4 l, n: M   at time = 9.01467E-02.6 ~& w" _' C1 k6 U2 W  j3 l
WARNING:    ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++; U8 u& m$ o  m: ]& Z
   NOTE:  The set of redundant constraints has changed at time = 9.01433E-02.
6 E: R# y( I9 ]   ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
发表于 2011-5-6 11:51:59 | 显示全部楼层
回复 fynymq 的帖子
! k1 v) N0 m! _4 j" f
# A  M2 R: ^) L' J: ?8 V我现在也遇到了你去年遇到的问题,请问你是怎么解决的,谢谢赐教!
发表于 2011-8-29 23:14:33 | 显示全部楼层
ping21 发表于 2011-5-6 11:51
8 `5 i9 V0 H9 Y0 m4 |回复 fynymq 的帖子, p6 o, U1 R0 x  U

; k& t/ S9 w) C7 c我现在也遇到了你去年遇到的问题,请问你是怎么解决的,谢谢赐教!
+ Q* r& @, Z4 Z! [) n% i
兄弟 我看他那处应该是柔性体,然后楼主用flexlink做成刚体,本身adams对这种仿真形式就不能很好支持。建议用有限元软件做成柔性体,导出mnf文件。而且你最好把你的模型贴上来,否则很难判断问题
0 s7 Q$ R& i2 E2 V
发表于 2012-6-20 15:44:00 | 显示全部楼层
我也碰到这个问题了,没有高手解决吗,,,所有约束副加上就有问题,去一个就可以运行。。。
您需要登录后才可以回帖 登录 | 注册会员

本版积分规则

Archiver|手机版|小黑屋|机械社区 ( 京ICP备10217105号-1,京ICP证050210号,浙公网安备33038202004372号 )

GMT+8, 2025-8-28 02:32 , Processed in 0.068455 second(s), 19 queries , Gzip On.

Powered by Discuz! X3.5 Licensed

© 2001-2025 Discuz! Team.

快速回复 返回顶部 返回列表